
Image: Evan-Amos, Wikimedia Commons (public domain)
Sega Saturn Core for Analogue Pocket Reaches v0.1.2 With Faster CD Reads
The Sega Saturn core for the Analogue Pocket reached version 0.1.2 on 9 November, its third release in six days. The update, from a developer who publishes on GitHub as akoaysigod, speeds up games that read heavily from the CD and adds the Saturn's X button to the Pocket's controls menu. Two more fixes landed in the project in the following day, one for corrupted movies in Sakura Wars and one for a freeze in Sega Rally Championship, and the developer says the first of them "will go out in the next release".
What 0.1.2 changes
The release notes are two lines: "Performance improvements in CD read heavy games" and "Add a way to map X button". The pull requests behind them say more.
The CD change is in the core's firmware, not its FPGA logic. Some games poll the Saturn's CD block constantly: Doom asks for its status once a field. On the Pocket, that command arrived while the firmware was busy running the program that stands in for the Saturn's SMPC system controller, so the reply waited until the next pass, around 370 microseconds. The fix lets the SMPC program yield when a CD command is pending. Measured in simulation on Doom, the master SH-2's time per field in its CD polling loop fell from about 390 to about 73 microseconds. Doom still takes 7 fields to draw a frame, the pull request notes, and Fighters Megamix reaches its title screen one field earlier.
A second performance change was merged four minutes before the release was published: a prefetch in the cache in front of the Pocket's PSRAM, which fetches the next 32-byte line after each fill. The code had been written for the previous build but was switched off because it did not fit. In simulation of a Fighters Megamix round-one fight, frames drawn at the full 60 per second rose from 92.4% to 98.3%.
The X button fix answers a user report. The Pocket's Controls menu listed no X button, so it could not be assigned. It now sits on ZL by default and can be moved to any button. The core offers four preset mappings as well, from "Y B A = A B C, L1 R1 = L R" to one that puts the Saturn's X, Y and Z on the Pocket's Y, X and L1.

Squeezing a Saturn into the Pocket
The core is a port, not a new design. The README calls it "a port of the MiSTer Saturn core", Saturn_MiSTer by Sergiy Dvodnenko (srg320) and contributors, "trimmed to fit the Pocket's Cyclone V FPGA" and adapted to the Pocket's memories and Analogue's framework. It is based on the MiSTer code as of 19 October 2026. On the MiSTer, the Saturn core's own README asks for a 128 MB SDRAM module as primary memory and recommends a second module for better compatibility. The Pocket has no such add-on, so the port works with the memory on the handheld's board.
Space was the first problem. When 0.1.1 arrived on 5 November its notes said only that it "frees room on the FPGA for future builds", and the pull request behind it explains why that mattered: the Cyclone V was full, at 1,845 of its 1,848 logic array blocks, and only 7 of 23 build attempts fitted at all. Memories were moved out of logic into dedicated RAM blocks, and VDP1's shading arithmetic into DSP blocks, with each change checked in simulation as identical to the old logic at its boundary. The current build uses 17,572 of the chip's logic modules; the README of akoaysigod's PlayStation core puts the total at 18,480.
That trimming has a cost the developer has already run into. The Sakura Wars movies showed a grid of faint 8x8 squares because one removed feature, the 16M-colour mode of the RBG0 background layer, turned out to be the mode those movies use. The pull request that restores it says the cut had been judged safe from logging 34 US discs, none of which used that mode. A test build posted in the issue fixed it for the user who reported it, who wrote that "it works great". The Sega Rally freeze, a black screen after the licence screen, came down to the SMPC firmware reacting about 8.5 milliseconds late in one wait loop. Both fixes were merged after 0.1.2 and are not in it.
Setting it up, and how it compares
The project's instructions say each game needs its folder of .cue and .bin files and a small JSON entry, with up to 25 .bin files per game. A Saturn BIOS is required, named boot.rom and 512 KB, and is not included. CHD images, ISO tracks and WAVE, MP3 or OGG audio are not supported, and CHDs need converting first. Multi-disc games get one entry per disc, because the core cannot swap discs. Japanese and European games need the Region setting changed and the core reset. Settings also cover the RAM cartridges some games need (1 MB and 4 MB), a backup RAM cartridge, VDP1 mesh blurring and weave or bob deinterlacing. The core runs in the Dock but has no analog video output and does not support sleep.
On the MiSTer, the Saturn core has been in development since its repository was created in October 2023. Outside FPGA, Cart & Pixel covered the Ymir Saturn emulator's 0.4.0 release last month. On the Pocket, the Saturn joins a run of CD systems: akoaysigod's own PlayStation core, a trimmed MiSTer PSX core that reached 0.3.2 on 8 November, and NeoMillie's Neo Geo CD core.
What is still unknown
The 0.1 release notes said the core "should open and boot every game, in theory", but no compatibility list has been published, and Doom and Fighters Megamix were named as known performance problems. An open issue reports that the Pocket Sync and pupdate updaters do not create entries for games with more than 10 .bin files, Virtua Fighter 2 among them, and the instructions say those updaters have not been tried with the core. No date has been given for the next release with the Sakura Wars and Sega Rally fixes. Pull requests to read the region from the disc and to free more FPGA space are still open.
New to openFPGA? The Analogue Pocket openFPGA cores guide covers what the Pocket's cores can play and how to install them.
Sources
- akoaysigod on GitHub: pocket_saturn_core releases
- akoaysigod on GitHub: Sega Saturn for the Analogue Pocket (README)
- akoaysigod on GitHub: pocket_saturn_core commit history
- akoaysigod on GitHub: CD block firmware: answer commands at once instead of after the SMPC run (pull request #6)
- akoaysigod on GitHub: RAM-H cache: turn the next-line prefetch on (pull request #11)
- akoaysigod on GitHub: Free FPGA room and meet timing at every corner (pull request #1)
- akoaysigod on GitHub: Full-screen FMV corruption on Analogue Pocket (issue #5)
- akoaysigod on GitHub: VDP2: restore RBG0 16M colour, fixing the Sakura Wars FMVs (pull request #13)
- akoaysigod on GitHub: SMPC firmware: skip ahead in the INTBACK continue wait (pull request #15)
- akoaysigod on GitHub: HOW_TO_ADD_GAMES.txt
- akoaysigod on GitHub: JSON not created for games with more than 10 .bin files (issue #12)
- MiSTer-devel on GitHub: Sega Saturn for MiSTer
- akoaysigod on GitHub: PSX core on the Analogue Pocket
- akoaysigod on GitHub: pocket_psx_core releases
More News

Arcade-RaizingMD Core Brings Battle Garegga and Batrider to MiSTer-devel
A rewritten open source core for Raizing's five Toaplan-based shooters, from Sorcer Striker to Battle Bakraid, was published to the MiSTer-devel organisation on 15 November. Its author says the old code was replaced and retuned against measurements from real boards.

Bandai Pippin Gets a MiSTer Core
Dani Sarfati's BandaiPippin core, published to MiSTer-devel on 14 November, recreates Apple and Bandai's 1996 console down to its PowerPC 603. It boots the Pippin ROMs and four discs to their menus; playing titles through is not yet tested.

MiSTer Gets a DEC AlphaStation 200 Core That Runs OpenVMS, Tru64 and Windows NT
Dani Sarfati's DECAlphaStation200 core puts DEC's 1995 Alpha workstation on the MiSTer with its own SRM and ARC firmware, and boots OpenVMS, Tru64 UNIX, NetBSD, FreeBSD, Windows NT 4.0 and a Windows 2000 release candidate.