
Image: Cart & Pixel
MiSTer Gets an IBM RS/6000 43P 7248 Core That Boots AIX, Solaris, OS/2 Warp and Windows NT for PowerPC
An IBM RS/6000 43P model 7248, the PowerPC 604 workstation IBM sold from 1995, now runs on the MiSTer. Dani Sarfati published the IBMRS6K7248 core to the MiSTer-devel organisation on GitHub on 3 November, with release files dated 2 November, and the README lists five operating systems that install and boot from disk on it: AIX 4.3.3, AIX 5.1, Solaris 2.5.1 for PowerPC, OS/2 Warp PowerPC Edition and Windows NT 4.0 for PowerPC. Three of those were dead ends that lasted a year or two in the mid-1990s, and the author's own research notes say no emulator has ever modelled this board.
What the core does
The core recreates the 7248, codenamed Carolina, and can also present itself as the near-identical IBM Power Series 850, which is what OS/2 Warp needs. It runs the machine's own firmware: the releases/ folder includes boot.rom, the 7248's firmware version 1.12, along with an NVRAM file to start from, the SMS diskette image that holds the firmware's setup menus, and IBM's ARC boot diskette for Windows NT. The README's hardware list is long: a PowerPC 604 that runs big- and little-endian, up to 112 MB of memory, an S3 Vision864 with VGA text and graphics modes from 8 to 32 bits per pixel plus its 2D engine and hardware cursor, an NCR 53C810 SCSI controller with two hard disks and a CD-ROM that supports eject and CD audio, an IDE disk and ATAPI CD-ROM when running as the Power Series 850, a floppy drive taking 720 KB to 2.88 MB images, an AMD PCnet Ethernet adapter bridged to the MiSTer's own network, a CS4232 sound chip covering Windows Sound System, Sound Blaster Pro, OPL2 FM and MPU-401 MIDI to an MT32-pi, PS/2 keyboard and mouse, and two serial ports.
That inventory matches the real machine as the Linux IBM7248 HOWTO described it: an integrated 2 MB S3 Vision864 graphics adapter, an ncr53c810 SCSI controller, a Crystal cs4232 sound chip, a PCnet32 Ethernet adapter and setup through IBM's System Management Services.
There are two builds of the core. The standard one runs the CPU at 70 MHz and "runs on any MiSTer". A second build runs it at 90 MHz, which the README says is "beyond the FPGA's rated timing", tested on the SuperStation, and may not boot on other hardware. Either way it is slower than the real thing: the README puts the original 7248's 604 at 120 MHz, and Wikipedia's model table lists the 7248 with 604 processors at 100, 120, 132 or 166 MHz from its introduction on 19 June 1995 to July 1997.

Setup is more involved than a console core. The RBF goes in _Unstable/ or _Computer/ and has to be renamed IBMRS6K7248.rbf, because Main's support for the core goes by that name. Memory should be set to 112 MB, which needs a 128 MB SDRAM module, though AIX runs in 32 MB or more. Each operating system wants its own NVRAM file, because installing one rewrites the firmware's boot list and OSes that share a file "get in each other's way". The README then walks through each install: AIX 5.1 takes about two and a half hours from the first volume; Solaris needs Sun's IBM boot diskette left mounted after installation, because the firmware Solaris needs runs from it; OS/2 needs the Power Series 850 model and a blank 2 GB disk, and its surface check, format and file copy "take a few hours"; Windows NT needs a disk built on a PC with a Python script that writes IBM's ARC firmware onto it, after which setup is told the computer is an "IBM Power Series 6050,6070 and RS/6000 Model 7248".
Networking, CUE/BIN and CHD CD images, CD audio and fast disk writes need a Main_MiSTer build with support for the core. Sarfati's pull request adding Ethernet, CD audio and SCSI handling to Main was opened on 26 October and was still open on 3 November, so for now those features need the author's own build of Main; plain ISO images and disks work without it.
Why this board
The 7248 was a PReP machine. The PowerPC Reference Platform was a system architecture IBM published in 1994 so that hardware makers could build PowerPC computers able to run several operating systems, among them Windows NT, OS/2, Solaris, Taligent and AIX. Wikipedia's article says PReP systems "were never popular", and that a replacement, the Common Hardware Reference Platform, was published in late 1995 after "no one was particularly happy with PReP". The RS/6000 article is blunter about how the multi-OS promise worked out: "Solaris, OS/2 and Windows NT were also ported to PowerPC", but "in the end only IBM's Unix variant AIX was used and supported on RS/6000".
The ports themselves did not last long. Windows NT 4.0 was the last NT release for PowerPC, and Service Pack 2, released on 14 December 1996, was the final release for the architecture. Solaris 2.5.1, released in May 1996, is listed by Wikipedia as "The only Solaris release that supports PowerPC", and the port was cancelled before Solaris 2.6. OS/2 Warp PowerPC Edition reached a gold master on 15 December 1995 and, according to OS/2 Museum, "was only available to a limited number of IBM customers and was never actively marketed"; its installer supported only the Power Series 830 and 850. The Workplace OS project it came from was cancelled in March 1996 after about four years and roughly $2 billion.
That is why the core's model switch matters. OS/2 Museum says the 43P-7248 "was nearly identical to the Power Series 850", built on the same motherboard, with the RS/6000 adding an on-board SCSI controller. The ibmfiles.com page on the Power Series says the 830, 850 and the 7248 were released together in 1995 under the Carolina name, with identical motherboards, and lists AIX, OS/2 for PowerPC, Solaris 2.5.1, Windows NT and a heavily modified Linux as what ran on them. One MiSTer core therefore covers the only desktop hardware the OS/2 port ever supported and the workstation it was sold alongside.
The two AIX releases are later than the machine: 4.3.3 shipped on 17 September 1999 and AIX 5L 5.1 on 4 May 2001, by which point the 7248 had been out of production for years. AIX "was the primary operating system for the RS/6000 series", and it is the one the author got running first.

Seventeen days from firmware to four operating systems
The project's own bring-up log starts on 17 October with the first run of the 7248 ROM on a PowerPC 604 model in a Verilator test bench, where the firmware got as far as sizing memory and then looped because there was no model of the MPC105 host bridge for it to talk to. Later the same day the bridge was in and memory sizing passed. The log records the firmware then stalling for what would have been 16 seconds of machine time, about 70 minutes on the bench, because it was polling a Sound Blaster register that did not exist yet; a board always has the chip, so the firmware never expected it to be missing. The CS4232 model exists because of that.
The notes are candid about dead ends. On 18 October the AIX 4.3.3 diagnostics CD kept ejecting itself every three minutes because the machine's model code did not satisfy it; by the evening the author had worked out that this diagnostics CD rejects a real 7248 as well, and moved to the install CD instead. A separate research document surveys every emulator that might have helped and concludes that QEMU's 40p machine "is the only working emulator of an IBM PReP box", that it emulates the older 7020-40P rather than the 7248, that it boots AIX through a third-party Open Firmware port rather than IBM's ROM, that "No emulator anywhere models the Carolina board", and that MAME has only non-working skeletons for IBM's PReP machines. QEMU's documentation for the 40p lists the peripherals it models, among them a PCI VGA card, IDE, floppy, PCnet and PReP NVRAM, but says nothing about running Windows NT or OS/2; the author's notes record NT stopping in QEMU when it switches the processor to little-endian mode, which QEMU does not implement. The core's README lists the 604's big- and little-endian operation first among its features.
The commit history shows how the work was done. All of the hundred most recent commits in the original repository carry a co-author line crediting Claude, Anthropic's AI model; the PCAT-286 and Virtual Boy cores covered here before were also built with AI tools, as their authors said at the time. The repository published to MiSTer-devel has a single commit, "Initial commit to MiSTer-devel with working release."
Who is behind it
Sarfati's GitHub profile describes a site reliability engineer in Detroit focused on AWS and Linux, with over 15 years of automation and systems administration. This is far from a first MiSTer core: the same author seeded the NeXTStation Turbo Color core into MiSTer-devel on 10 October and the Sun-2, Sun-3 and SPARCstation 20 cores on 6 and 19 October, and the list of pull requests to Main_MiSTer this autumn includes support for the Sun family, an Apple Macintosh PowerPC 7300, an HP 9000 family, SGI Indy fixes and a Bandai Pippin. Repositories for a DEC AlphaStation 200 and the Pippin sit on the author's own account. The pattern is workstations and servers from the 1990s that emulation has mostly skipped, which puts this core in the same line as the PCAT-286 core in giving the MiSTer a computer history that goes well beyond games.
What is not known yet
The README lists the limits: FM music is OPL2 only, IDE under OS/2 is PIO with no DMA and therefore slow, video modes above a 100 MHz dot clock such as 1280 by 1024 run slowly, the Solaris console text does not return after X exits, and there is no parallel port, second floppy or ISA Plug and Play. The 90 MHz build depends on where the fitter happens to place logic, so the README asks anyone building it to test each result on hardware.
Whether the Main_MiSTer pull request is merged decides when networking, CD audio and CHD images work on a stock MiSTer. There are no versioned releases beyond the dated files, and no compatibility list for software beyond the five operating systems and their desktops. Readers new to FPGA recreation can start with the FPGA explainer on what a core is and why timing like the 70 versus 90 MHz split matters.
Sources
- MiSTer-devel on GitHub: IBM RS/6000 43P 7248 for MiSTer
- MiSTer-devel on GitHub: IBMRS6K7248 releases
- danifunker on GitHub: Bring-up log
- danifunker on GitHub: IBM RS/6000 43P 7248 (Carolina): emulators, firmware and OS media
- MiSTer-devel on GitHub: Add IBMRS6000 Support to Main_MiSTer (pull request 1388)
- GitHub: danifunker
- MiSTer-devel on GitHub: Pull requests by danifunker to Main_MiSTer
- MiSTer-devel on GitHub: NeXTStation Turbo Color for MiSTer
- MiSTer-devel on GitHub: Sun SparcStation 20 for MiSTer
- Wikipedia: IBM RS/6000
- Wikipedia: PowerPC Reference Platform
- ibmfiles.com: IBM Power Series 850 / 830
- The Linux Documentation Project (IIT Kanpur mirror): IBM 7248 HOWTO: overview
- OS/2 Museum: OS/2 Warp, PowerPC Edition
- Wikipedia: Workplace OS
- Wikipedia: Windows NT 4.0
- Wikipedia: Solaris (operating system)
- Wikipedia: IBM AIX
- QEMU documentation: PReP: the IBM 40p machine
More News

Arcade-RaizingMD Core Brings Battle Garegga and Batrider to MiSTer-devel
A rewritten open source core for Raizing's five Toaplan-based shooters, from Sorcer Striker to Battle Bakraid, was published to the MiSTer-devel organisation on 15 November. Its author says the old code was replaced and retuned against measurements from real boards.

Bandai Pippin Gets a MiSTer Core
Dani Sarfati's BandaiPippin core, published to MiSTer-devel on 14 November, recreates Apple and Bandai's 1996 console down to its PowerPC 603. It boots the Pippin ROMs and four discs to their menus; playing titles through is not yet tested.

MiSTer Gets a DEC AlphaStation 200 Core That Runs OpenVMS, Tru64 and Windows NT
Dani Sarfati's DECAlphaStation200 core puts DEC's 1995 Alpha workstation on the MiSTer with its own SRM and ARC firmware, and boots OpenVMS, Tru64 UNIX, NetBSD, FreeBSD, Windows NT 4.0 and a Windows 2000 release candidate.