
Image: Polymega product image
Polymega Opens Preorders for a $99 Master System, Game Gear and SG-1000 Adapter Set
Polymega has put a set of four cartridge adapters up for preorder that lets its Mega Drive module take Sega's 8-bit cartridges and cards. The CA03 Mega Cartridge Adapter Set covers Game Gear, Master System, Sega Card, Mark III, SG-1000 and SC-3000 games, costs $99, and ships in February 2027, according to Polymega's product page. Retro Dodo's report, dated 3 November, gives the UK price as £74. The set needs the EM03 Mega Element Module, which is sold separately.
What is in the box
The product page lists four adapters. The GG adapter takes Game Gear cartridges from North America, PAL regions and Japan. The SMS adapter takes Master System and Master System PAL cartridges. The CARD adapter takes the Sega Card and the Japanese MyCard, the credit card sized format Sega used before and alongside cartridges. The fourth adapter takes Mark III, SG-1000 and SC-3000 cartridges, the Japanese line that preceded the Master System.
Polymega describes the set as "a collection of four specialized cartridge adapters designed for use exclusively with" the EM03, and adds that it is "Not compatible with other systems or modules." The page's own summary is shorter: it "Plays Game Gear, Master System, Sega Card and SG-1000 games on your EM03". Preorders come with 30-day returns. The store's header currently reads "NOW AVAILABLE - MEGA CARTRIDGE ADAPTER SET", while the listing itself says "Pre-Order: Ships February 2027"; the pre-order wording is the one with a date attached.
The EM03 Mega Module Set, the part the adapters plug into, is also $99. Its page says it plays Genesis and 32X cartridges from North America, Mega Drive and 32X cartridges from PAL regions, and Mega Drive and Super 32X cartridges from Japan, and it comes with the RC03 Mega Retro Controller. So the full price of adding Sega's 8-bit library to a Polymega that does not already have the Mega module is $198 before the base unit.

How Polymega plays cartridges
Polymega is made by Playmaji, a Los Angeles company founded as RetroBlox by Bryan Bernal and Eric Christensen, both formerly of Insomniac Games, and renamed in 2017. The console was announced in January 2017, renamed Polymega that May, and released worldwide on 12 September 2021 after delays. At launch the base unit cost $450 and Element Modules $80, according to the Nintendo Life review cited by Wikipedia. Unlike the FPGA consoles it competes with, Polymega runs Linux and plays games through emulation, using licensed versions of Kega Fusion, MAME, Mednafen and Mesen modified by Playmaji. Disc systems are handled by the base unit's drive; cartridges need a module.
Polymega's current module lineup, from its store, is the EM01 Power module, the EM02 Super module, the EM03 Mega module and the EM04 Turbo module at $99 each, the EM05 Ultra module for Nintendo 64, also $99 and still on preorder, and a $120 EM06 Pro module on preorder. Wikipedia records the N64 module's release in December 2023, Atari's minority investment in Playmaji in July 2023, and the Retro Gun Controller's release in 2025. The CA03 set is an accessory for an existing module rather than a module of its own.
The systems the adapters cover
The four adapters span Sega's whole 8-bit cartridge history. The SG-1000 launched in Japan on 15 July 1983 at ¥15,000, the same day as Nintendo's Famicom, alongside the SC-3000, a computer with nearly identical hardware plus a built-in keyboard. Sega's pocket-sized card format for it, the Sega MyCard, ran to 29 titles and needed a ¥1,000 Card Catcher add-on to play. The Mark III followed on 20 October 1985 at the same price, as the third iteration of the SG-1000 line, and all SG-1000 games run on it.
The Master System was the Mark III remodelled for export. It reached North America in September 1986, Europe in August 1987 and Japan in October 1987, and Sega put its sales at about 13 million, with Tectoy selling around 8 million more licensed variants in Brazil. Its Sega Card format held up to 256 Kbit, against 4 Mbit for the biggest cartridges. Master System games also ran on the Mega Drive through Sega's own Power Base Converter, the adapter the CA03 most resembles in spirit.
The Game Gear, launched in Japan on 6 October 1990 at ¥19,800 and in North America and Europe in April 1991 at $149.99 and £99.99, was built on Master System hardware to make porting easy: it shares the Zilog Z80 processor and the SN76489 sound chip, with a larger 4,096 colour palette. More than 300 games were released and roughly 14 million units sold before Sega ended support in 1997.
How it compares
The obvious comparison is Analogue's Mega Sg+, the FPGA Mega Drive announced in October at $219.99 and due in December. Analogue's page says the Master System adapter is included in its box, and that adapters for Game Gear, MyCard, Mark III and SG-1000/SC-3000 are sold separately; its store lists a Mega Sg Cartridge Adapter Set at $49.99, and all three regional Mega Sg+ models were out of stock at the time of writing. Analogue puts the combined library at "2,180+" in one place on the page and "2,200+" in another.
The two approaches differ in kind as much as price. Analogue recreates the hardware in an FPGA, plays cartridges only, and takes an original Mega CD through its connector. Polymega emulates in software, plays discs from its base unit's own drive, and needs a module for each cartridge family. For a player whose Sega shelf runs from SG-1000 cards to Game Gear carts, the CA03 and EM03 together cost $198 on top of a Polymega, against Analogue's $219.99 console plus its separately sold adapters. Polymega's most recent release before this was the City Connection collection, a $39.99 disc of seven Jaleco games.
What is not known yet
Polymega has given a shipping month, February 2027, and nothing finer. The only non-US price so far is Retro Dodo's £74. Polymega has not said whether the system software already includes the Master System, Game Gear and SG-1000 emulation the adapters need or whether a firmware update will arrive with them, and the product page does not say how region switching or the Game Gear's screen is handled on a television. The banner that calls the set available now, while the listing calls it a pre-order, has not been explained.
Sources
- Polymega: CA03 - Mega Cartridge Adapter Set
- Polymega: EM03 - Mega Module Set
- Polymega: Modules
- Retro Dodo: Polymega Launches SEGA "Mega Cartridge Adapter" Set For Their Modular Retro Console
- Analogue: Mega Sg+
- Analogue: Analogue Store
- Wikipedia: Polymega
- Wikipedia: Master System
- Wikipedia: Game Gear
- Wikipedia: SG-1000
More News

Arcade-RaizingMD Core Brings Battle Garegga and Batrider to MiSTer-devel
A rewritten open source core for Raizing's five Toaplan-based shooters, from Sorcer Striker to Battle Bakraid, was published to the MiSTer-devel organisation on 15 November. Its author says the old code was replaced and retuned against measurements from real boards.

Bandai Pippin Gets a MiSTer Core
Dani Sarfati's BandaiPippin core, published to MiSTer-devel on 14 November, recreates Apple and Bandai's 1996 console down to its PowerPC 603. It boots the Pippin ROMs and four discs to their menus; playing titles through is not yet tested.

MiSTer Gets a DEC AlphaStation 200 Core That Runs OpenVMS, Tru64 and Windows NT
Dani Sarfati's DECAlphaStation200 core puts DEC's 1995 Alpha workstation on the MiSTer with its own SRM and ARC firmware, and boots OpenVMS, Tru64 UNIX, NetBSD, FreeBSD, Windows NT 4.0 and a Windows 2000 release candidate.